Gauteng
Solar panel cleaning in Pretoria
RobCon Electrical is based in Pretoria East, so Pretoria is the area we clean most. We clean rooftop and ground-mounted solar arrays for homes, estates, guesthouses and businesses right across the city, from Waterkloof and Lynnwood through to Montana and Pretoria North. Because we are local, we can usually get to a Pretoria site within a few working days.
What dirties panels in Pretoria
- Dry Highveld winters leave a fine dust film that cuts output long before panels look dirty
- Jacaranda and plane-tree pollen in spring bonds to the glass once dew settles
- Ongoing residential development on the eastern edge throws construction dust across whole suburbs
Most Pretoria homes we service run 10 to 20 panels, which takes about one to two hours from arrival to pack-up.
Where we work
We regularly clean solar systems in and around these areas — if yours isn't listed, ask anyway.
- Pretoria East
- Waterkloof
- Lynnwood
- Faerie Glen
- Garsfontein
- Menlo Park
- Silver Lakes
- Montana
- Pretoria North
- Moreleta Park
Residential
R35
From, per panel
Commercial
R25
From, per panel
Minimum call-out applies. Prices exclude VAT.
What our clients say
Since our panels have been cleaned, our solar generation have been 32% higher. Great and trustworthy team — I should have done this much sooner! We forget how much dust our panels accumulate.
Zander Walters
Midstream residential owner
Contacted Andre Roberts — he promised to see that the solar problem we had was fixed within a week. It's now 4 days later, Andre visited me in person and my problem is fixed. Thanks to Andre for keeping his promise and providing me with great service!
Dawid Ludik
Solar client
They are professional, passionate and proud of their product. Big aim on client satisfaction and after sales service.
Michael Pieterson
Solar client
Great service from Andre and team and we are very happy.
Nico Nagel
Solar client
Book a panel clean in Pretoria
Send us your suburb and panel count — we'll come back with a price.
Questions we get asked
Solar panel cleaning FAQs
RobCon Electrical charges from R35 per panel for residential solar panel cleaning and from R25 per panel for commercial sites in Pretoria, Centurion, Midrand, Johannesburg and the rest of Gauteng. A minimum call-out applies and prices exclude VAT. A 12-panel home system therefore starts at around R420 excluding VAT.
Most solar systems in Gauteng benefit from a professional clean every 6 to 12 months. Clean more often if the property is near construction, on a busy road, surrounded by trees, close to mines or industrial areas, or frequently visited by birds. Waiting until panels look dirty usually means production has already been lost.
Yes. Dust, pollen and bird droppings block sunlight from reaching the cells, so a soiled array produces less than it was designed to. One RobCon client in Midstream measured 32% higher generation after a professional clean. The exact gain depends on how dirty the panels were and how long since the last clean.
We do not recommend it. Roof work carries a real fall risk, household detergents and hard tap water leave residue and streaks, and abrasive brushes or high-pressure washers can scratch the glass and damage anti-reflective coatings — which can void your panel warranty. RobCon uses specialist soft brushes and a safe cleaning method that removes grime without damaging the panels.
Yes. RobCon Electrical is based in Pretoria East and services all of Gauteng, and also travels to Limpopo, North West, Free State and Mpumalanga for larger residential and commercial sites.
A typical residential array of 10 to 20 panels takes about one to two hours. We arrive with our own equipment, so no site water or electricity is required. Commercial sites are scheduled around your operating hours to avoid disrupting production.
RobCon Electrical is a full electrical contractor with many years of hands-on solar experience. We install, repair and maintain solar systems, so our team understands your panels, mounting rails, cabling and electrical components — not just how to wash the glass.
The correct method is a gentle one. Panels are cleaned early in the morning or late in the afternoon while the glass is cool, because cold water on hot glass can crack it. We loosen the dirt with water, work across the surface with a specialist soft brush, then rinse so nothing dries on. No abrasive pads, no household detergents and no high-pressure washers — those scratch the glass and damage the anti-reflective coating. We also check the mounting rails, clamps and visible cabling while we are up there, since a clean is the best chance to catch a problem early.
Sometimes. Single-storey homes with a low roof pitch can often be cleaned with extended water-fed poles from ground level, which is safer and quicker. Double-storey homes, steep pitches and commercial flat roofs need proper roof access and fall precautions. We assess this on arrival and use whichever method is safest for the specific roof — the price per panel stays the same either way.
Clean water and a soft brush designed for solar glass. That is genuinely it for most soiling. Dishwashing liquid, window cleaner and general household detergents leave a film that attracts dust faster than before, and hard tap water dries into mineral spotting that blocks light. Stubborn bird droppings or lichen need to be softened and lifted, never scraped. If a residue will not lift with the correct method, the panel usually has a coating or seal issue that needs looking at rather than more scrubbing.
Not properly. Rain rinses loose dust but leaves behind the bonded layer — pollen, road film, bird droppings and Highveld grime — and as it dries it can actually leave streaks and mineral deposits that shade the cells. On the Gauteng Highveld you also get long dry winters with almost no rain at all, which is exactly when soiling losses peak. Rain is a rinse, not a clean.